CCNA Lab Diagram

Select the components required to meet a network specification
Interpret network diagrams
Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and hosts
Initial device configuration.
Manage IOS configuration files. (including: save, edit, upgrade, restore)
Device Lockdown
Perform and verify initial switch configuration tasks including remote access management
Verify network status and switch operation using basic utilities (including: ping, traceroute, telnet, SSH, arp, ipconfig), SHOW & DEBUG commands
Identify, prescribe, and resolve common switched network media issues, configuration issues, auto negotiation, and switch hardware failures.
Configure enhanced switching technologies (including: VTP, RSTP, VLAN, PVSTP, 802.1q).
Configure, verify, and troubleshoot VLANs
Configure, verify, and troubleshoot trunking on Cisco switches
Configure, verify, and troubleshoot interVLAN routing
Configure, verify, and troubleshoot VTP
Configure, verify, and troubleshoot RSTP operation
Interpret the output of various show and debug commands to verify the operational status of a Cisco switched network.
Implement basic switch security (including: port security, trunk access, management vlan other than vlan1, etc.)
Configure, verify and troubleshoot DHCP and DNS operation on a router.(including: CLI/SDM)
Implement static and dynamic addressing services for hosts in a LAN environment
Calculate and apply an addressing scheme including VLSM IP addressing design to a network

Select the appropriate media, cables, ports, and connectors to connect routers to other network devices and hosts
Configure, verify, and troubleshoot RIPv2
Access and utilize the router to set basic parameters.(including: CLI/SDM)
Connect, configure, and verify operation status of a device interface
Verify device configuration and network connectivity using ping, traceroute, telnet, SSH or other utilities
Perform and verify routing configuration tasks for a static or default route given specific routing requirements
Configure, verify, and troubleshoot OSPF
Configure, verify, and troubleshoot EIGRP
Verify network connectivity (including: using ping, traceroute, and telnet or SSH)
Troubleshoot routing issues
Verify router hardware and software operation using SHOW & DEBUG commands.
Implement basic router security
Configure and apply ACLs based on network filtering requirements.(including: CLI/SDM)
Configure and apply an ACLs to limit telnet and SSH access to the router using (including: SDM/CLI)
Verify and monitor ACLs in a network environment
Troubleshoot ACL issues
Configure NAT for given network requirements using (including: CLI/SDM)
Troubleshoot NAT issues
Configure and verify a basic WAN serial connection


Configure and verify Frame Relay on Cisco routers
Troubleshoot WAN implementation issues
Configure and verify a PPP connection between Cisco routers
Plus not in the CCNA but standard in the Real World
Network management using SNMP
Network Time Protocol NTP
Syslog
Network monitoring using Netflow, PRTG, MRTG
Floating Static Routes
Route Redistribution including default route redistribution.


Note our labs are not scripted! We let you think for yourself!!